中文
English
Vietnamese
Español
Русский
- Lasenic® ABS
- Lasenic® PS
- Lasenic® PMMA
- Lasenic® HIPS
- Lasenic® PP
- Lasenic® CPVC
- Lasenic® ABS+PC30%
- Lasenic® PVC
- Lasenic® HDPE
- Benlonate® PC+ABS30%
- Benlonate® PET
- Benlonate® PC
- Qunsail® POM Acetal
- Semolar® UHMWPE
- Recalon® PA6/PA66
- Recalon® MC Nylon
- Sufoner® PPS
- Sufoner® PEEK
- Sufoner® PEI
- Sufoner® PSU
- Sufoner® PI
- Sufoner® PAI
- Turcite®X Rod
- Turcite®A Rod
Material Introduction
Sufoner® PEEK is a high temperature, high performance thermoplastic specialty engineering plastic. PEEK can be used continuously at 260 degrees without losing its physical and chemical properties. PEEK has extremely high stiffness and hardness, as well as unique high tensile strength and fatigue strength. In addition, its heat-resistant non-deformation performance and chemical stability are excellent.
Sufoner® PEEK6000C and Rolemide® PEEK 6800CM are ideal for the semiconductor manufacturing industry to meet the requirements of precision microvia processing with a minimum pore size of 0.1mm or less.
Sufoner® PEEK6000C is a composite of polyetheretherketone PEEK and ceramic matrix. It has excellent processability, low cost, ultra-thin thickness (T1-5mm), high wear resistance, low thermal expansion, almost no burr machining, and is not easily deformed. High heat distortion temperature and very good thermal stability.
●Special composite material Sufoner® PEEK 6800CM sheet
This material is a composite of PEEK and other custom formulated materials, which combines strength, stiffness and stability very well. The machining deformation is very small, the burr is very small, and the size is stable. It is especially suitable for high-precision applications. It is an ideal material for semiconductor test sockets, nests, fixtures and packaging equipment.
main feature:
1. The heat dissipation performance reaches 2.1w/(k.m), which is close to 10 times of ordinary PEEK plastic;
2. Less micro-hole burrs under 0.1mm, better electrical properties and hygroscopicity than PEEK;
Sufoner® PEEK Standard Sizes, Colors, Grades, Brands, Types
| Sufoner® PEEKSize | ||
| Name | Thickness(mm) | Width × length (mm) |
| PEEK6000C Sheet PEEK 6800CM Sheet |
1mm to 5mm | 150mm x 210mm 150mmx150mm 295mmx295mm |
| PEEK Sheet | 5mm to 40mm | 600mmx1200mm 1250mm x1000mm |
| PEEK6000CRod | 1mm to 5 mm | 300mm |
| PEEK Rod | 6mm to 100mm | 1000mm |
Name: Polyether etherketone
Types: Rods，Sheets，ProfilesGrades include:
● Rolemide® PEEK unfilled
● Rolemide® PEEK+GF
● Rolemide® PEEK6000C (ceramic filled)
● Rolemide® PEEK 6800CM
● Rolemide® PEEK 5800ESD
Note.Remarks
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.
-
♦ Extremely high strength and stiffness, good toughness♦ High temperature resistance, can withstand 260 degrees♦ Good thermal stability, good heat resistance and deformation resistance♦ Good creep resistance, self-lubricating performance♦ Good dimensional stability and good radiation resistance♦ Good flame retardancy and good hydrolysis resistance
Skype
E-Mail
TradeManager
873285424
13421367051
