
- Lasenic® ABS
- Lasenic® PS
- Lasenic® PMMA
- Lasenic® HIPS
- Lasenic® PP
- Lasenic® CPVC
- Lasenic® ABS+PC30%
- Lasenic® PVC
- Lasenic® HDPE
- Benlonate® PC+ABS30%
- Benlonate® PET
- Benlonate® PC
- Qunsail® POM Acetal
- Semolar® UHMWPE
- Recalon® PA6/PA66
- Recalon® MC Nylon
- Sufoner® PPS
- Sufoner® PEEK
- Sufoner® PEI
- Sufoner® PSU
- Sufoner® PI
- Sufoner® PAI
- Turcite®X Rod
- Turcite®A Rod
Material Introduction
Lasenic® ABS+PC30%Lasenic® ABS+PC30% Standard Sizes, Colors, Grades, Brands, Types
Material Introduction
Lasenic® ABS+PC30% alloy was modifying by PC and ABS materials, include 70% ABS+30% PC. The PC and ABS blends integrated PC and ABS advantages. On the one hand, it can improve the heat resistance, impact resistance and tensile properties of ABS, And make ABS used at high-end field . On the other hand, it can reduce the melt viscosity of the PC, improve PC liquidity and improve its processing performance, and reduce inside stress , to reduce the impact strength and notch sensitivity thickness. The operating temperature -40-120 °C.Lasenic® ABS+PC30% Standard Sizes, Colors, Grades, Brands, Types
Lasenic® ABS+PC30% sheet | |
Thickness (mm) | Width × Length (mm) |
2mm-200mm | 610mmx1220mm/2000mm |
Lasenic® ABS+PC30% rod | |
Diameter (mm) | Length (mm) |
2mm-200mm | 1000mm/2000mm |
Colors Include: Natural, black
Types: Rods, sheets
Note.Remarks
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.
-
♦ High mechanical strength, good creep resistance (even at low temperatures)
♦ having a high impact strength
♦ Keep good rigidity at a wide range.
♦ anti-energy rays, good electrical insulation
♦ very good dimensional stability
♦ Good chemical resistance, acid resistance, water-based and pH more acidic substances, with the exception of strong oxidizing acids